Heidenhain TNC 620 (34056x-04) Cycle programming Manual de usuario descargar pdf (Pagina 291)

100

101

BASIC ROTATION over two holes (Cycle 401, DIN/ISO: G401,

software option 17)

14.3

TNC 620 | User's Manual Cycle Programming | 5/2013

291

Preset number in table Q305: Enter the preset

number in the table in which the TNC is to save the

determined basic rotation. If you enter Q305=0,

the TNC automatically places the determined

basic rotation in the ROT menu of the Manual

Operation mode. The parameter has no effect

if the misalignment is to be compensated by a

rotation of the rotary table (Q402=1). In this case

the misalignment is not saved as an angular value.

Input range 0 to 2999

Compensation Q402: Define whether the TNC

should set the measured misalignment as basic

rotation or should align via rotating the rotary table:

0: Set basic rotation

1: Rotate the rotary table

If you specify rotating the rotary table, the TNC

does not save the measured misalignment, even if

you have defined a table row in parameter Q305.

Set to zero after alignment Q337: Define whether

the TNC should set the display of the aligned rotary

axis to 0:

0: Do not set the rotary axis display to 0 after

alignment

1: Set the rotary axis display to 0 after alignment.

The TNC only sets the display to 0 if you have set

Q402=1.

1 2 ... 286 287 288 289 290 291 292 293 294 295 296 ... 467 468

Comentarios a estos manuales

Sin comentarios

Heidenhain TNC 620 (34056x-04) Cycle programming Manual de usuario Pagina 291

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Heidenhain TNC 620 (34056x-04) Cycle programming